其传动装置可根据用户的要求选用电动滚筒或带驱动架的驱动装置。
其安装倾斜角度一般不得大于20°。
TD75 belt conveyor is a series of popular type product, its towing part is made up of cotton canvas, nylon and polyester canvas and steel cord conveyor belt and used for continuous transportation equipment. TD75- belt has the advantages of large amount of transmission, simple structure, low cost, easy to maintain, parts with high degree of standardization to achieve the automatic control of delivery system .It is widely used in mining, metallurgy, power generation, heating ,coal ,and other sectors, and transport a variety of bulk materials and items, the loose density of which is 500-2500kg/m3. Belt conveyor is used in the ambient temperature of-20 ℃ to +40 ℃and distribute materials in the temperature below 50 ℃. On dust-proof, explosion-proof, corrosion resistant demands occasions, it should take other measures.
The gear can according to the requirements of users to choose roller-driven or with push bracket driver device
The tilt angle of its installation is not more than 20°generally.
主要型号及技术参数:
MAIN MODELS AND TECHNICAL PARAMETERS:
承载托 |
带 速tape Speed（m/s） |
带 宽 Width of tape（mm） |
|||||
|
|
500 |
650 |
800 |
1000 |
1200 |
1400 |
|
|
输 送 量conveying capacity Q（t/s） |
|||||
槽 |
0.8 |
78 |
131 |
- |
- |
- |
- |
|
1.0 |
97 |
164 |
278 |
435 |
655 |
891 |
|
1.25 |
122 |
206 |
348 |
544 |
819 |
1115 |
|
1.6 |
156 |
264 |
445 |
696 |
1048 |
1427 |
|
2.0 |
191 |
323 |
546 |
853 |
1284 |
1748 |
|
2.5 |
232 |
391 |
661 |
1033 |
1556 |
2118 |
|
3.15 |
- |
- |
824 |
1233 |
1858 |
2528 |
|
4.0 |
- |
- |
- |
- |
2202 |
2996 |
平 |
0.8 |
41 |
67 |
118 |
- |
- |
- |
|
1.0 |
52 |
88 |
147 |
230 |
345 |
460 |
|
1.25 |
66 |
110 |
184 |
288 |
432 |
588 |
|
1.6 |
84 |
142 |
236 |
368 |
553 |
753 |
|
2.0 |
103 |
174 |
289 |
451 |
677 |
922 |
|
2.5 |
125 |
211 |
350 |
546 |
821 |
111 |
输送长度Conveying length（m）/功率Power(kw) |
≤12/3 |
≤12/4 |
≤6/4 |
≤10/5.5 |
≤10/7.5 |
≤10/11 |
|
|
12-20/4-5.5 |
12-20/5.5 |
6-15/5.5 |
10-20/7.5-11 |
10-20/11 |
10-20/18.5 |
|
|
20-30/5.5-7.5 |
20-30/7.5-11 |
15-30/7.5-15 |
20-40/11-22 |
20-40/15-30 |
20-40/22-37 |
|
1.表中输送量是在物料密度为1.0t/m3，输送机倾角≤18，物料堆积角为30的条件下得出。
2.可输送物料密度在2.5t/m3以下。
3.输送长度不局恨于表中所列值，可根据用户的需要进行制造。
Accessory:
1.The conveying quantity is worked out by the following conditions: material density
is between 1.0 t/m3-1.6 t/m3;conveyor obliquity is less than 18 and the material stockpile angle is 30.
2.Density of material is less than 2.5 T/M3.
3.The conveying length is not restricted to the form; different length can be manufactured according to customers’ demands.
