It can apply to the metallurgy, mining, cement, construction, corhart, quarries, railways, ceramic and chemical industries, and also use for breaking various materials with coarse (middle), breaking pressive strength less than 250MPa. This series of jaw-crasher have high broken rate, well-distributed size product, simple, reliable, and is easy to use for maintenance, and have low power consumption.
主要型号及技术参数（粗破）:
Main models and technical parameters (cruder crasher):
|
型号、规 |
给料口尺寸（宽×长）Measurement of material inlet(L×W)(mm) |
给料粒度Feed fraction(mm) |
排料口调整范围Adjusting range of discharge gate (mm) |
主轴转速Peed of main shaft(r/min) |
生产率Productivity(t/h) |
电机功率Power of motor(kw) |
外型尺寸(长×宽×高)Outside measurement(L×W×H)(mm) |
重量 |
|
PE150×250 |
150×250 |
≤125 |
10-40 |
250 |
1-3 |
5.5 |
896×746×935 |
1100 |
|
PE250×400 |
250×400 |
≤210 |
20-80 |
318 |
4-14 |
15 |
1430×1310×1340 |
2800 |
|
PE400×600 |
400×600 |
≤350 |
40-80 |
275 |
8-20 |
30 |
1700×1732×1655 |
6500 |
|
PE500×750 |
500×750 |
≤425 |
50-100 |
275 |
30-60 |
55 |
2030×1966×1920 |
11500 |
|
PE600×900 |
600×900 |
≤500 |
65-160 |
250 |
50-110 |
75 |
2248×2180×2373 |
16700 |
|
PE750×1060 |
750×1060 |
≤630 |
80-140 |
250 |
72-140 |
110 |
2531×2420×2783 |
25000 |
|
PE900×1200 |
900×1200 |
≤750 |
98-165 |
220 |
150-230 |
132 |
3135×2799×3260 |
42200 |
Main models and technical parameters (fine crasher):
|
型号规格 |
给料口尺寸（宽×长）Measurement of material inlet(L×W)(mm) |
给料粒度 |
排料口调整范围Adjusting range of discharge gate(mm) |
主轴转速Speed of main shaft(r/min) |
生产率Productivity(t/h) |
电机功率Power of motor(kw) |
外型尺寸(长×宽×高)Outside measurement(L×W×H)(mm) |
重量(不含电机) |
|
PEX150×750 |
150×750 |
≤120 |
10-40 |
320 |
5-16 |
15 |
1380×1658×1025 |
3500 |
|
PEX250×1000 |
250×1000 |
≤210 |
15-50 |
330 |
10-32 |
37 |
1530×1992×1380 |
6500 |
|
PEX250×1200 |
250×1200 |
≤210 |
15-50 |
330 |
15-35 |
37 |
1530×2192×1380 |
7200 |
|
PEX350×1300 |
350×1300 |
≤250 |
20-90 |
300 |
20-85 |
75 |
2335×1800×1663 |
11000 |
|
PEX350×750 |
350×750 |
≤300 |
15-50 |
300 |
16-35 |
30 |
1535×1880×1596 |
6500 |
CONE CRUSHER
本系列破碎机适用于破碎中等以上硬度的各种矿石和岩石，具有结构可靠、生产效率高、调整方便、使用经济等特点。其弹簧保险系统是过载保护装置，可使异物铁块通过破碎腔而不害机器。采用干油或水两种密封形式，使石粉与润滑隔离，保证可靠工作。破碎腔型式由矿石用途决定，标准型适用于中碎；中型号适用于细碎；短头型适用于细碎。
This series of crusher is used for crushing of ores and rocks, the advantages are: reliable structure, high efficiency, easy-to-adjust and economical. The safety spring system is the overload protection device, which makes foreign material goes through the machine without bring any hurt to it. The sealing modes are oil and water, which segregate the stone powder and lubricating system. The crushing chamber is decided by the purpose of ore, the standard model is suitable for medium crushing; the medium model is suitable for fine crushing and the short head model is suitable for fine crushing.
主要型号及技术参数:
MAIN MODELS AND TECHNICAL PARAMETERS:
|
型号Model |
破碎锥直径Diameter of crushing cone（mm） |
最大给料尺寸Max. feeding size（mm） |
排料口宽度Width of discharge opening（mm） |
处理能力Processing capacity（t/h） |
电机功率Motor power（kw） |
高轴摆动次数Swing frequency of main shaft |
重量Weight（t） |
外形尺寸（长×宽×高）Dimensions(L×W×H) （mm） |
|
|
PYB |
600 |
600 |
65 |
12-25 |
40 |
30 |
356 |
5 |
2234×1370×1675 |
|
PYD |
|
|
35 |
3-13 |
12-23 |
|
|
5.5 |
2234×1370×1675 |
|
PYB |
900 |
900 |
115 |
15-50 |
50-90 |
55 |
333 |
11.2 |
2692×1640×2350 |
|
PTZ |
|
|
60 |
5-20 |
20-65 |
|
|
11.2 |
2692×1640×2350 |
|
PYD |
|
|
50 |
3-13 |
15-50 |
|
|
11.3 |
2692×1640×2350 |
|
PYB |
1200 |
1200 |
145 |
20-50 |
110-168 |
110 |
300 |
24.7 |
2790×1878×2844 |
|
PTZ |
|
|
100 |
8-25 |
42-135 |
|
|
25 |
2790×1878×2844 |
|
PYD |
|
|
50 |
3-15 |
18-105 |
|
|
25.3 |
2790×1878×2844 |
|
PYB |
1750 |
1750 |
215 |
25-50 |
280-480 |
160 |
245 |
50.3 |
3910×2894×3809 |
|
PTZ |
|
|
185 |
10-30 |
115-320 |
|
|
50.3 |
3910×2894×3809 |
|
PYD |
|
|
85 |
5-13 |
75-230 |
|
|
50.2 |
3910×2894×3809 |
|
PYB |
2200 |
2200 |
300 |
30-60 |
59-1000 |
280-260 |
220 |
80 |
4622×3302×4470 |
|
PTZ |
|
|
230 |
10-30 |
200-580 |
|
|
80 |
4622×3302×4470 |
|
PYD |
|
|
100 |
5-15 |
120-340 |
|
|
81.4 |
4622×3302×4470 |
